Grizzly G9983 Manuel d'utilisateur télécharger pdf (Page 22)

-20- G9983 15" Open-End Wide-Belt Sander

Conveyor Height

Conveyor height is controlled by turning the

handwheel shown in Figure 13. A scale is locat-

ed near the handwheel for gauging conveyor

movement. The scale is marked in millimeters

and inches. Figure 14 demonstrates how the

handwheel movement affects the conveyor.

After you have moved the conveyor to the desired

height, lock it in place with the conveyor lock han-

dle shown in Figure 13.

⁄64"

⁄32"

Figure 13. The handwheel moves the conveyor and

the scale tells you how far the conveyor moved.

Figure 14. This illustration shows how

the handwheel moves the conveyor.

Conveyor

Height Scale

Handwheel

Conveyor

Lock Handle

Feed Belt Speed

The feed belt motor (shown in Figure 15 with the

cover removed) controls the speed of the feed

belt. The Model G9983 features speeds of 13.1

FPM and 16.4 FPM.

Figure 15. This is the feed belt motor. Place the

chain on either of the sprockets and the feed

belt will travel at the speed shown.

To change feed belt speeds:

1. Unplug the sander!

2. Remove the cap screw that secures the feed

belt motor cover.

3. Loosen the for motor mount bolts so that the

motor will slide up enough to get the chain off

the sprockets.

4. Determine which speed is best for your appli-

cation and place the chain on either set of

the sprockets shown in Figure 15.

5. Replace the motor cover and secure it with

the cap screw.

16.4

FPM

13.1

FPM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Grizzly G9983 Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à broyer Grizzly G9983