Grizzly G9983 Manuel d'utilisateur télécharger pdf (Page 15)

G9983 15" Open-End Wide-Belt Sander -13-

Beginning Assembly

Most of your new wide-belt sander has been

assembled at the factory, but some setup is

required after delivery. We have organized the

setup process into steps. Please make sure the

sander is placed in its final position in your shop

and follow along in the order presented in this

section.

Keep loose clothing out

of the way of machinery

and keep hair pulled

back.

Wear safety glasses dur-

ing the entire setup

process. Failure to com-

ply may result in serious

personal injury.

Disconnect power to the

machine when perform-

ing any setup or assem-

bly. Failure to do this

may result in serious

personal injury.

Some metal parts may

have sharp edges on

them after they are

formed. Please examine

the edges of all metal

parts before handling

them. Failure to do so

could result in injury.

NOTICE

The waxy grease must be completely

cleaned from the table column for smooth

table height adjustments.

Handwheel Handle

To install the handwheel handle:

1. Thread the handle into the handwheel as

shown in Figure 7.

2. After handle is completely threaded down,

tighten the jamnut so the handle will not

come loose. Make sure to leave the plastic

sleeve loose enough to rotate when you

crank the handwheel.

Figure 7. Install handle onto handwheel.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Grizzly G9983 Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à broyer Grizzly G9983