Grizzly G0632 Manuel d'utilisateur télécharger pdf (Page 30)

-28-

G0632 16" x 42" Variable Speed Wood Lathe

Selecting Turning

Tools

Lathe tools come in a variety of shapes and sizes,

and usually fall into five major categories.

• Gouges—Mainly used for rough cutting,

detail cutting, and cove profiles. The rough

gouge is a hollow, double-ground tool with

a round nose, and the detail gouge is a hol

low, double-ground tool with either a round or

pointed nose.

Figure 35. Example of a gouge.

• Skew Chisel—A very versatile tool that can

be used for planing, squaring, V-cutting,

beading, and parting off. The skew chisel is

flat, double-ground with one side higher than

the other (usually at an angle of 20°–40°).

Figure 36. Example of a skew chisel.

• Scrapers—Typically used where access for

other tools is limited, such as hollowing oper

ations. This is a flat, double-ground tool that

comes in a variety of profiles (round nose,

spear point, square nose, etc.) to match

many different contours.

Figure 37. Example of a round nose scraper.

• Parting Tools—Used for sizing and cut-

ting off work. This is a flat tool with a sharp

pointed nose that may be single- or double-

ground.

Figure 38. Example of a parting tool.

• Specialty Tools—These are the unique,

special function tools to aid in hollowing, bowl

making, cutting profiles, etc. The Swan Neck

Hollowing Tool shown on

Page 34 is a good

example of a speciality tool.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 55 56

Pas de commentaire

Grizzly G0632 Manuel d'utilisateur Page 30