Grizzly H7664 Manuel d'utilisateur

COPYRIGHT © JULY, 2005 BY GRIZZLY INDUSTRIAL, INC.WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROV

H7664 2-in-1 Combination Nailer/Stapler-10-Compressed Air SystemThe Model H7664 is designed to be oper-ated at 60-100 PSI using clean, dry, regu-lated

H7664 2-in-1 Combination Nailer/Stapler-11-Safety Yoke A safety yoke mechanism on the nose of the nailer/stapler acts as a safety device. When the t

H7664 2-in-1 Combination Nailer/Stapler-12-SECTION 4: OPERATIONSLoading Figure 3. Catch lever engaged and magazine pusher retracted. When replacing br

H7664 2-in-1 Combination Nailer/Stapler-13-5. Pull the trigger.— If the nail/staple drove into the wood far enough, continue with your intended o

H7664 2-in-1 Combination Nailer/Stapler-14-A jammed nail or staple must be cleared before using the nailer/stapler again. To clear a jammed

H7664 2-in-1 Combination Nailer/Stapler-15-Figure 7. Opening cover to clear a jam.To clear a jammed nail from the dis-charge area:1. DISCONNEC

H7664 2-in-1 Combination Nailer/Stapler-16-6. Open the nose cover as if to clear a jammed nail/staple.7. Watch the discharge area and p

H7664 2-in-1 Combination Nailer/Stapler-17-SECTION 5: MAINTENANCECleaningDisconnect the nailer/stapler from the air supply before cleaning. Us

H7664 2-in-1 Combination Nailer/Stapler-18-TroubleshootingSymptom Possible Cause SolutionAir leaking at trig-ger valve area.1. O-rings in trigger valv

H7664 2-in-1 Combination Nailer/Stapler-19-H7664 Parts Breakdown 

H7664 2-in-1 Combination Nailer/Stapler-20-H7664 Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION1 PH7664001 SPCL CAP SCR M4-.7 X 20 43 PH7664

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty doe

H7664 2-in-1 Combination Nailer/Stapler-22-

WARRANTY CARDName _________________________________________________________________Street ____________________________________________________________

FOLD ALONG DOTTED LINEGRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069TAPE ALONG EDGES--PLEASE DO NOT STAPLEName________________________

Table of ContentsSECTION 1: SAFETY ...4Safety Inst

H7664 2-in-1 Combination Nailer/Stapler-4-Safety Instructions For Pneumatic Tools1. KEEP ALL SAFETY DEVICES IN PLACE and in working order.2. R

H7664 2-in-1 Combination Nailer/Stapler-5-10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long

H7664 2-in-1 Combination Nailer/Stapler-6-1. HAND INJURIES: Do not place your hands near the nail/staple point of entry. A nail/staple can d

H7664 2-in-1 Combination Nailer/Stapler-7-Operating this nailer/stapler can propel objects into the air, caus-ing immediate eye damage. To

H7664 2-in-1 Combination Nailer/Stapler-8-SECTION 2: INTRODUCTION If you have any comments regarding this manual, please write to us at the following

H7664 2-in-1 Combination Nailer/Stapler-9-SECTION 3: SET UPFigure 1. Model H7664 inventory.UnpackingYour Model H7664 left our warehouse in a car