Grizzly G0705 Manuel d'utilisateur

COPYRIGHT © MARCH, 2010 BY GRIZZLY INDUSTRIAL, INC. REVISED APRIL, 2013 (TR)WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM

-8-Model G0705 (Mfg. since 09/09) WEARING PROPER APPAREL. Do not wear clothing, apparel or jewelry that can become entangled in moving pa

Model G0705 (Mfg. since 09/09)-9-Additional Safety for Mill/DrillsUNDERSTANDING CONTROLS. Make sure you understand the use and operation of all contro

-10-Model G0705 (Mfg. since 09/09)SECTION 2: POWER SUPPLYAvailabilityBefore installing the machine, consider the avail-ability and proximity of the re

Model G0705 (Mfg. since 09/09)-11-Improper connection of the equipment-grounding wire can result in a risk of electric shock. The wire with g

-12-Model G0705 (Mfg. since 09/09)110V ConversionThe Model G0705 can be converted for 110V operation. This conversion job consists of dis

Model G0705 (Mfg. since 09/09)-13-4. Remove the screws that secure the brass contactor mounting plate to the back of the electrical box

-14-Model G0705 (Mfg. since 09/09)NeutralHotGround110 VAC5-20 Plug(As Recommended)HotHotGround6-15 Plug(As Recommended)GGroundPEV2V1U2U1U2V1V2Z1W1Z2W2

Model G0705 (Mfg. since 09/09)-15-Wear safety glasses dur-ing the entire setup pro-cess!This machine presents serious injury hazards to untrained user

-16-Model G0705 (Mfg. since 09/09)Figure 12. Inventory.GECDFHIJKLInventoryCrate Contents (Figures 11 & 12) QtyA. Cabinet Base ...

Model G0705 (Mfg. since 09/09)-17-The unpainted surfaces of your machine are coated with a heavy-duty rust preventative that prevents corr

This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, r

-18-Model G0705 (Mfg. since 09/09)Site ConsiderationsWeight LoadRefer to the Machine Data Sheet for the weight of your machine. Make sure that the sur

Model G0705 (Mfg. since 09/09)-19 -Mounting OptionsBefore you place your machine on the cabinet, we recommend you consider the following options for l

-20-Model G0705 (Mfg. since 09/09)Figure 16. Machine mount example.Using Machine MountsUsing machine mounts, shown in Figure 16, gives the advantage o

Model G0705 (Mfg. since 09/09)-21-AssemblyAssembly of the Model G0705 consists of attach-ing the three handwheel handles to the machine.To assemble yo

-22-Model G0705 (Mfg. since 09/09)LevelingWhether you mount your machine to the cabinet stand or to an existing workbench, it must be lev-eled.—If you

Model G0705 (Mfg. since 09/09)-23-Before starting the machine, make sure you have performed the preceding assembly and adjustment instructions, and yo

-24-Model G0705 (Mfg. since 09/09)Break-InIt is essential to closely follow the break-in proce-dure below to help distribute lubrication through-out

Model G0705 (Mfg. since 09/09)-25-SECTION 4: OPERATIONSDamage to your eyes and lungs could result from using this machine without proper pro-tective g

-26-Model G0705 (Mfg. since 09/09)Basic ControlsUse the descriptions and figures below to become familiar with the basic controls of your machine.Dept

Model G0705 (Mfg. since 09/09)-27-Longitudinal Travel Handwheels: Control longi-tudinal (X-Axis) travel of the table.Cross Travel Handwheel: Controls

Table of ContentsINTRODUCTION ... 2Manual Accuracy ... 2Contact In

-28-Model G0705 (Mfg. since 09/09)Failure to follow cutting speed guidelines when setting spindle speed may threat-en operator and bystander safety an

Model G0705 (Mfg. since 09/09)-29-Spindle Pulley Idler Pulley Motor Pulley234 5 6817Speed ChangesThe Model G0705 is capable of twelve di

-30-Model G0705 (Mfg. since 09/09)Calculating Spindle Speed for DrillingTwist/Brad Point Drill Bits Soft Wood Hard Wood Plastic Brass Aluminum Mild St

Model G0705 (Mfg. since 09/09)-31-Spindle Height2. Loosen the thumb screw on the rim surface of the handwheel dial. Turn the dial until the "0&q

-32-Model G0705 (Mfg. since 09/09)The Model G0705 features an R-8 spindle that accepts R-8 collets and arbors.To install tooling:1. DISCONNECT

Model G0705 (Mfg. since 09/09)-33-4. Refer to Page 32 for detailed instructions for installing or removing the drill chuck and arbor in the s

-34-Model G0705 (Mfg. since 09/09)Depth StopHeadstock PositionThe depth stop is used to limit the range of down-ward movement by the drill bit or cutt

Model G0705 (Mfg. since 09/09)-35-Table TravelThe mill/drill table moves in the longitudinal (X-axis) and cross (Y-axis) directions.Longitudinal

-36-Model G0705 (Mfg. since 09/09)SECTION 5: ACCESSORIESACCESSORIESH2689—R-8 Quick Change Collet SetAn affordable quick change collet system with ultr

Model G0705 (Mfg. since 09/09)-37-G2861—Face MillG4051—Carbide Insert for Face MillThis 21/2" Face Mill accepts four carbide inserts (not

-2-Model G0705 (Mfg. since 09/09)INTRODUCTIONMachine DescriptionWe stand behind our machines. If you have any questions or need help, use th

-38-Model G0705 (Mfg. since 09/09)SECTION 6: MAINTENANCEAlways disconnect power to the machine before performing maintenance. Failure to do this may r

Model G0705 (Mfg. since 09/09)-39-Points requiring periodic lubrication are:A. Column. A light film of oil (Mobil Vactra 2 or ISO 68 equivalent) w

-40-Model G0705 (Mfg. since 09/09)Inspect regularly for tension and wear. Refer to Figure 57 for proper belt tension. Belt deflec-tion s

Model G0705 (Mfg. since 09/09)-41-Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-ops. If y

-42-Model G0705 (Mfg. since 09/09)Symptom Possible Cause Possible SolutionTool slips in collet. 1. Collet is not fully drawn up into spindle taper.2.

Model G0705 (Mfg. since 09/09)-43-Gibs are wedge-shaped pieces of metal that fill the gap between the dovetailed ways of the machine. By adjusting the

-44-Model G0705 (Mfg. since 09/09)6. Tighten the black thumb knob.Figure 60. Adjusting spring tension.NotchTo adjust the Y-axis leadscrew:1. Locate

Model G0705 (Mfg. since 09/09)-45-These pages are current at the time of printing. However, in the spirit of improvement, we may make chang-es to the

-46-Model G0705 (Mfg. since 09/09)NeutralHotGround110 VAC5-20 Plug(As Recommended)HotHotGround6-15 Plug(As Recommended)GGroundPEV2V1U2U1U2V1V2Z1W1Z2W2

Model G0705 (Mfg. since 09/09)-47-L 1LLLLLLLL4377664432244884475555NNNNNNNNNPEV2V1U2U1V2V2V1V12T114NOCONTACTORSIEMENS KM1 CONTACTORSIEMENS KM222NC32NC

Model G0705 (Mfg. since 09/09)-3-Figure 1. Model G0705 identification.IdentificationA. Control PanelB. Drawbar & CapC. Belt CoverD. MotorE. C

-48-Model G0705 (Mfg. since 09/09)Headstock Parts Breakdown12345677-17-27-37-27-489101111-111-111-211-311-411-711-611-512131415161718192021222323-123-

Model G0705 (Mfg. since 09/09)-49-REF PART # DESCRIPTION REF PART # DESCRIPTION1 P0705001 HEAD CASTING 20 P0705020 PINION SHAFT2 P0705002 DRAWBAR 21 P

-50-Model G0705 (Mfg. since 09/09)Headstock Parts List (continued)REF PART # DESCRIPTION REF PART # DESCRIPTION48 PCAP05 CAP SCREW 1/4-20 X 3/4 80 P07

Model G0705 (Mfg. since 09/09)-51-Base Parts Breakdown201202203204205205205205205206206207207207209210211212212212213216217217218218219219220221222223

-52-Model G0705 (Mfg. since 09/09)Base Parts ListREF PART # DESCRIPTION REF PART # DESCRIPTION201 P0705201 TABLE 226 PB09 HEX BOLT 5/16-18 X 1/2202 P0

Model G0705 (Mfg. since 09/09)-53-2T114NOCONTACTORSIEMENS KM1 220V CONTACTORSIEMENS KM2 220V22NC32NC44NO13NO21NC31NC43NO6T3A2A1A14T21L15L33L22T114NO22

-54-Model G0705 (Mfg. since 09/09)409401402403404405405406407408Labels Breakdown and ListSafety labels warn about machine hazards and ways to prevent

CUT ALONG DOTTED LINEName _____________________________________________________________________________ Street ______________________________________

TAPE ALONG EDGES--PLEASE DO NOT STAPLEFOLD ALONG DOTTED LINEFOLD ALONG DOTTED LINEGRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069Place

WARRANTY AND RETURNSGrizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchas

-4-Model G0705 (Mfg. since 09/09)The information contained herein is deemed accurate as of 5/6/2013 and represents our most recent product specificati

Model G0705 (Mfg. since 09/09)-5-The information contained herein is deemed accurate as of 5/6/2013 and represents our most recent product specificati

-6-Model G0705 (Mfg. since 09/09)The information contained herein is deemed accurate as of 5/6/2013 and represents our most recent product specificati

Model G0705 (Mfg. since 09/09)-7-ELECTRICAL EQUIPMENT INJURY RISKS. You can be shocked, burned, or killed by touching live electrical components or