Grizzly H3123 Manuel d'utilisateur télécharger pdf (Page 14)

-12-

H3123 Electric Guitar Kit

5. Place the black neckplate setter and the sil-

ver neckplate over the holes on the back of

the guitar body.

6. Secure the neckplate assembly, the guitar

body, and the neck together with the includ-

ed 1

3

⁄4" wood screws (Figure 14). DO NOT

use glue.

4. Using a

5

⁄32" drill bit, drill 1

3

⁄4" deep holes

straight through the four holes in the back of

the body (Figure 13). Note—Drilling the

holes deeper than 1

3

⁄4" could result in drilling

out through the fingerboard.

Figure 13. Drilling the screw holes.

Figure 14. Correctly attached neck.

Pick Guard

To attach the pick guard to the guitar body:

1. Push one white and one black wire through

the hole shown in Figure 15.

2. Push the remaining black wire through the

hole shown in Figure 16.

Figure 15. Pick guard wires.

Figure 16. Pick guard wire.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Commentaires sur ces manuels

Pas de commentaire