Grizzly 28 clipped head framing nailer h6145 Manuel d'utilisateur

Copyright © FebruAry, 2005 by grizzly industriAl, inC. revised june, 2012 (bl)Warning: no portion of this manual may be reproduced in any shape or for

H6145 28° Clipped Head Framing Nailer-8-OPERATIONSLoading Figure 3. Sliding pusher toward the catch lever pusher.When replacing nails in your Mod

H6145 28° Clipped Head Framing Nailer-9-Figure 6. Loosening cap screw for depth adjustment.The nose of the gun houses a depth adjust-ment mechanism fo

H6145 28° Clipped Head Framing Nailer-10-A jammed nail must be cleared before using the nailer again. The two places where a nail can get

H6145 28° Clipped Head Framing Nailer-11-Replacing Pistons/O-RingsIf you use your nailer day in and day out, repair pistons are cheap ins

H6145 28° Clipped Head Framing Nailer-12-CLEANING & LUBRICATION CleaningUse a good solvent to clean the nose assembly of the nailer. Al

H6145 28° Clipped Head Framing Nailer-13-H6145 Parts Breakdown &'()*+,-.&%&&&'&(&)&*&)&

H6145 28° Clipped Head Framing Nailer-14-H6145 Parts LIst REF PART # DESCRIPTION REF PART # DESCRIPTION1 PH6145001 SPCL CAP SCR M8-1.25 X 30 48 PW02M

H6145 28° Clipped Head Framing Nailer-15-1. O-rings must be replaced & operation of safety yoke must be checked.1. Tighten screws.2. Replace O-rin

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty doe

Name _________________________________________________________________________Street ________________________________________________________________

For Your Own Safety Read Instruction Manual Before Operating This EquipmentThe purpose of safety symbols is to attract your attention to po

FOLD ALONG DOTTED LINEGRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069TAPE ALONG EDGES--PLEASE DO NOT STAPLEName________________________

H6145 28° Clipped Head Framing Nailer-1-6. ONLY ALLOW TRAINED AND PROPERLY SUPERVISED PER-SONNEL TO OPERATE MACHIN-ERY. Make sure operation ins

H6145 28° Clipped Head Framing Nailer-2-1. HAND INJURIES: Do not place your hands near the nail point of entry. A nail can deflect and tear through t

H6145 28° Clipped Head Framing Nailer-3-Operating this nailer can propel objects into the air, causing imme-diate eye damage. To protect

H6145 28° Clipped Head Framing Nailer-4-INTRODUCTION If you have any comments regarding this manual, please write to us at the following address:Grizz

H6145 28° Clipped Head Framing Nailer-5-SET UPFigure 1. Model H6145 inventory.BCDGUnpackingYour Model H6145 left our warehouse in a carefully

H6145 28° Clipped Head Framing Nailer-6-Compressed Air SystemThe Model H6145 is designed to be oper-ated at 70-120 PSI using clean, dry, regu-lated,

H6145 28° Clipped Head Framing Nailer-7-Safety Yoke A safety yoke mechanism (bump fire) on the nose of the nailer acts as a second-ary saf