Grizzly JACK STAND H8365 Manuel d'utilisateur télécharger pdf

Figure 1. Model H8365.

MODEL H8365

⁄4 TON HIGH

JACK STAND

INSTRUCTION SHEET

Introduction

The Model H8365

⁄4 ton high jack stand works at

heights of 68" to 76

⁄2" and supports a load of up

⁄4 ton.

Operation Instructions

1. Before positioning the jack stand under the

load, check to make sure that the vehicle is

at an appropriate height and is secure.

2. Extend the post by holding the saddle and

rotating the handle

(Figure 1). Make sure

that the saddle is centered under the load

point. Do not over-extend the load or the load

may shift and swing.

3. Slowly lower the component onto the jack

stand, making sure that the load point is still

centered and all three corners of the stand

base are still on the ground.

To remove the jack stand, secure or remove the

component until the jack stand can be lowered

and removed. Remove the jack stand while the

vehicle is securely supported.

Saddle

Handle

Base

To reduce the risk of death, serious per-

sonal injury or property damage when

using this jack stand, take the following

precautions:

• DO NOT overload this jack stand beyond

the rated capacity of

⁄4 ton. The rated

load is for an evenly distributed, verti

cally applied load. Overloading may

result in personal injury or property

damage.

• This jack should only be used to help

stabilize an already lifted vehicle or

support hanging auxiliary components,

such as a driveline or transmission. It

is not designed to support the weight

of an entire vehicle.

• ONLY use this jack stand on a hard

level surface capable of sustaining the

load being supported.

• Always make sure that the load point

is centered in the saddle and that all

three corners of the jack stand base are

firmly on the ground.

• Never modify or alter this jack stand.

• Never release the jack stand when it is

supporting a load.

• DO NOT over-extend the load. Over

extension of the load may cause it to

shift and swing.

Assembly

Refer to the Parts Breakdown located on the

back of this page for assembly.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#JM10211 PRINTED IN CHINA

1 2

Résumé du contenu

Page 1 - JACK STAND

Figure 1. Model H8365.MODEL H83651⁄4 TON HIGH JACK STANDINSTRUCTION SHEETIntroductionThe Model H8365 1⁄4 ton high jack stand works at heights of 68&qu

Page 2 - 

H8365 Parts Breakdown and Parts List

Commentaires sur ces manuels

Pas de commentaire

Grizzly JACK STAND H8365 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sports et loisirs Grizzly JACK STAND H8365. Grizzly JACK STAND H8365 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Sports et loisirs Grizzly JACK STAND H8365