Grizzly Air Belt H0596 Manuel d'utilisateur télécharger pdf

Introduction

This 25,000 RPM air belt sander requires 90 PSI,

4 CFM, and

/8" x 13" sanding belts. Four-pack

sanding belts (Model H2322) can be purchased

separately for the Model H0596.

Inventory

A. Air Belt Sander ........................................... 1

/8" x 13" Sanding Belts .............................. 2

C. Hex Wrench 3mm ...................................... 1

MODEL H0596

AIR BELT SANDER

INSTRUCTION SHEET

Figure 2. Loosening cap screw and hex nut.

Figure 1. Model H0596.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#BL8253 PRINTED IN TAIWAN

Adjusting Platen and Attaching Belt

To adjust the platen:

1. Using the hex wrench, loosen the cap screw

and hex nut shown in

Figure 2 and turn the

platen to the desired operating angle.

3. Tighten the cap screw and hex nut loosened

in Step 1.

Figure 3. Squaring mounting surfaces.

2. Make sure the platen and housing surfaces

(Figure 3A) are seated and flush with one

another. If these mounting surfaces are not

square, remove the platen from the housing

(Figure 3B) and reseat the platen and clamp

nut.

Platen

Clamp

Nut

A B

Platen

Housing

Mounting Surfaces

EYE INJURY HAZARD!

Always wear safety glasses

when using this tool to

prevent serious personal

injury.

INJURY HAZARD!

Always disconnect tool from

air to prevent unexpected

operation during service.

DUST HAZARD!

Always wear respirator when

using this tool.

1 2 3 4

Résumé du contenu

Page 1 - AIR BELT SANDER

IntroductionThis 25,000 RPM air belt sander requires 90 PSI, 4 CFM, and 3/8" x 13" sanding belts. Four-pack sanding belts (Model H

Page 2 - Maintenance

Figure 4. Loosening screw on platen.OperationTo operate the sander:1. Plug the sander into compressed air.2. Hold the sander and push the thro

Page 3

H0596 Parts Breakdown and ListREF PART # DESCRIPTION REF PART #

Page 4

Commentaires sur ces manuels

Pas de commentaire

Grizzly Air Belt H0596 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Machines à broyer Grizzly Air Belt H0596. Grizzly Air Belt H0596 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à broyer Grizzly Air Belt H0596